Final year B. Tech

TEMPERATURE AND PRESSURE DISTRIBUTION OF DIFFUSIVITY 

INTRODUCTION

Transport phenomena describes the fundamental concepts and laws of transportation and deals with the movement of various physical quantities in any mechanical or chemical process. It also discusses the connections and parallels between various forms of transit that could exist in any system. Three categories of transport exist in chemical or mechanical processes: 

  1. Momentum transfer, commonly referred to as fluid dynamics, is the study of the movement of  momentum across fluids.
  2. Energy transport, commonly referred to as heat transfer, deals with the movement of various types of energy within a system.
  3. The movement of numerous chemical species themselves is covered by mass transport.

Diffusion is the movement of substances due to random thermal molecular motion. It is the process of movement of molecules under a concentration gradient. It is an important process occurring in all living beings. Diffusion helps in the movement of substances in and out of the cells. In chemical engineering, diffusion is responsible for mass transfer. Three different patterns of diffusion are responsible in this process: ordinary diffusion, thermal diffusion, and pressure diffusion. Due to such great applications of Diffusivity in chemical engineering, we have made a blog on the effect of temperature and pressure on diffusivity as our Home Assignment under the Transport Phenomena.

DIFFUSIVITY (DIFFUSION)


Diffusion is defined as the movement of individual molecules of a substance through a semipermeable barrier from an area of higher concentration to an area of lower concentration. It is an important process occurring in all living beings. Diffusion helps in the movement of substances in and out of the cells. The molecules move from a region of higher concentration to a region of lower concentration until the concentration becomes equal throughout.

The flow velocity of diffusing substances is proportional to the concentration gradient. If j is the amount of substance transmitted through a reference area of ​​unit area per unit time, if the coordinate x is perpendicular to this reference area, if c is the concentration of the substance and the proportionality constant is D, then j = −D(dc/dx); dc/dx is the rate of change of concentration in the x direction, the minus sign indicates flow from high concentration to low concentration. D is called the spreading factor and determines the spreading factor.


ROLE OF DIFFUSION IN MASS TRANSFER

Diffusion may occur in one phase or in both phases in all the mass transfer operations. In case of distillation, the more volatile component diffuses through the liquid phase to the interface between the phases (liquid and vapour phases) and away from the interface into the vapour phase. The less volatile component diffuses in the opposite direction and passes from the vapour phase into the liquid phase. In case of gas absorption, The solute gas diffuses through the gas phase to the interface and then through the liquid phase (liquid solvent phase) from the interface between the phases. In case of crystallization, the solid solute diffuses through the mother liquor (liquid phase) to the solid phase (crystals) and deposit on the solid surfaces. In case of drying operation, liquid water (moisture) diffuses through the solid towards the surface of the solid, evaporates and then diffuses as a vapour into the gas phase (drying medium). In case of liquid-liquid extraction, the liquid solute diffuses through the affinate phase and then into the extract phase (solvent phase) from the interface between the phases.

DIFFUSION COEFFICIENT

The diffusion coefficient is the product of mean velocity and mean free path, with a prefactor of, and may be temperature dependent. Average speed depends only on temperature. Mean free path is inversely proportional to gas density. Therefore, a thinner atmosphere has a higher diffusivity. The quiescent, unconfined gas diffusivity, in which molecules diffuse through the interstitial gas, provides a basis for understanding the diffusivity in porous regolith.

  • EFFECT OF PRESSURE ON DIFFUSION COEFFICIENT

Diffusion coefficients are inversely proportional to total pressure or total molar density and are therefore reported by convention at a standard pressure of one atmosphere. Doubling the pressure of a diffusing mixture halves the diffusion coefficient, but the actual rate of diffusion remains unchanged. This seemingly paradoxical result occurs because doubling the pressure also doubles the concentration, according to the ideal gas equation of state, and hence doubles the concentration difference, which is the driving force for diffusion. The two effects exactly compensate.


  • EFFECT ON TEMPERATURE ON DIFFUSION COEFFICIENT

Diffusion coefficients increase with increasing temperature at a rate that depends on whether the pressure or the total molar density is held constant as the temperature is changed. If the rate increases as Ts at constant molar density (where s usually lies between 1/2 and 1), then it will increase as T1 + s at constant pressure, according to the ideal gas equation of state.


THERMODIFFUSION

In systems without concentration gradients, vapor diffuses due to temperature differences. This is called "thermal diffusion" or "thermodiffusion". The thermal diffusion process, also called the Soret effect, is the tendency of non-convective mixtures to separate under a temperature gradient. For binary mixtures, the Soret effect is measured by the Soret coefficient ST. That is, H. Ratio of thermal diffusion coefficient DT to molecular diffusion coefficient D. However, for multicomponent mixtures, thermal diffusivity is more commonly used as a measure of the Soret effect.

Low-pressure gas mixtures and ideal liquid mixtures have small thermal diffusivity magnitudes. In contrast, thermal diffusivities in non-ideal liquid mixtures, especially near the critical point, are large and depend strongly on energy interactions, molecular size and shape, and thermodynamic conditions. 


BARODIFFUSION

"Pressure diffusion" or "barodiffusion" is the relative diffusion of molecular species due to an overall pressure gradient.


EFFECT OF TEMPERATURE ON DIFFUSION

  • With the increase in temperature the interparticle spacing among the particles of liquid increases: - This is because the kinetic energy of the particles is associated with their movement. Whenever the temperature has increased the movement of particles increases thereby increasing the intermolecular spaces between them. Hence on increasing temperature, intermolecular forces reduce.
  • The particles gain energy to move with increased kinetic energy: - The actual average speed of the particles depends on their mass as well as the temperature – heavier particles move more slowly than lighter ones at the same temperature.

EFFECT OF PRESSURE ON DIFFUSION

  1. When the pressure increases then the particles come close to each other.

  2. Hence the particles of the different particles of matter get mixed with much easier.

  3. This intermixing of different particles of matter(solids, liquids, gasses) on their own is called diffusion

  4. Thus, the rate of diffusion gets increased and vice versa.

TEMPERATURE AND PRESSURE DEPENDENCE OF DIFFUSIVITIES 

For binary gas mixtures at low pressure, DAB is inversely proportional to pressure, increases with temperature, and is largely independent of the composition of a particular gas pair. The following equation for estimation at low pressure was developed from a combination of kinetic theory and appropriate state arguments.

Analysis of the experimental data yields dimensionless constants a = 2.745 x lop4 and b = 1.823 (pairs of non-polar gasses excluding helium and hydrogen), a = 3.640 x lop4 and b = 2.334 (for H2O and non-polar gasses composed pairs). The equation fits experimental data at atmospheric pressure with a mean deviation of 6-8%. If the gasses A and B are nonpolar and their Lennard-Jones parameters are known, then the kinetic method described in the next section is usually slightly more accurate.

At high pressure and liquid conditions, the behavior of DAA becomes more complex. The simplest and best understood situation is self-diffusion (interdiffusion of labeled molecules of the same chemical species). We first describe this case, then extend the results to almost binary mixtures.



A corresponding state plot for the reduced self-diffusivity. Here (cDAA) = (pDAA), for Ar, Kr, Xe, and CH, is plotted as a function of reduced temperature for several values of the reduced pressure. This chart is based on diffusivity. The corresponding state plot of the self-diffusion rate DAA for non-polar materials is shown in Fig. 2. This plot is based on self-diffusion measurements complemented by molecular dynamics simulations and low-pressure limit dynamics theory. The vertical axis is the DAA at pressure p and temperature T divided by the DAA at the critical point. This quantity is plotted as a function of vacuum pr =p/pc and vacuum temperature Tr=T/Tc . Since species A and the identified species A* are similar, all important traits are assumed to be of species A.


The figure shows that cDAA increases significantly with temperature, especially in liquids. At any temperature, cDAA decreases towards zero with increasing pressure. As pressure decreases, cDAA increases towards the low pressure limit, as predicted by kinetic theory. Readers are cautioned that this graph is preliminary and the lines are based on data for a very small number of materials (Ar, Kr, Xe, and CH) except for the low density limit.


Under guidance

Prof. Rakesh Sinha sir

Submitted by  

1. Nikhil Gabhane (Roll no. 21)

2. Gautam Lunkad (Roll no. 39)

3. Pratik Mali (Roll no. 41)

4. Yash Nahata (Roll no. 48)

5. Aaditi Shinghate (Roll no. 63)


Comments